[chronos@localhost /tmp/FOO]$ dmesg [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38.3+ (chrome-bot@chromeosbuild10) (gcc version 4.4.3 (gcc-4.4.3_cos_gg_53174) ) #1 SMP Mon Sep 19 17:53:55 PDT 2011 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] BIOS-e820: 00000000fffff000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] EFI v2.00 by INSYDE Corp. [ 0.000000] ACPI=0x7f5f2000 ACPI 2.0=0x7f5f2014 SMBIOS=0x7f4b5d98 [ 0.000000] Kernel-defined memdesc doesn't match the one from EFI! [ 0.000000] EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB) [ 0.000000] EFI: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000000e000) (0MB) [ 0.000000] EFI: mem02: type=3, attr=0xf, range=[0x000000000000e000-0x0000000000010000) (0MB) [ 0.000000] EFI: mem03: type=7, attr=0xf, range=[0x0000000000010000-0x000000000002f000) (0MB) [ 0.000000] EFI: mem04: type=4, attr=0xf, range=[0x000000000002f000-0x0000000000030000) (0MB) [ 0.000000] EFI: mem05: type=3, attr=0xf, range=[0x0000000000030000-0x000000000008f000) (0MB) [ 0.000000] EFI: mem06: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB) [ 0.000000] EFI: mem07: type=3, attr=0xf, range=[0x0000000000090000-0x00000000000a0000) (0MB) [ 0.000000] EFI: mem08: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000b00000) (10MB) [ 0.000000] EFI: mem09: type=3, attr=0xf, range=[0x0000000000b00000-0x0000000000f00000) (4MB) [ 0.000000] EFI: mem10: type=0, attr=0xf, range=[0x0000000000f00000-0x0000000001000000) (1MB) [ 0.000000] EFI: mem11: type=7, attr=0xf, range=[0x0000000001000000-0x000000007ae39000) (1950MB) [ 0.000000] EFI: mem12: type=4, attr=0xf, range=[0x000000007ae39000-0x000000007b3ba000) (5MB) [ 0.000000] EFI: mem13: type=7, attr=0xf, range=[0x000000007b3ba000-0x000000007b511000) (1MB) [ 0.000000] EFI: mem14: type=1, attr=0xf, range=[0x000000007b511000-0x000000007b51a000) (0MB) [ 0.000000] EFI: mem15: type=4, attr=0xf, range=[0x000000007b51a000-0x000000007b726000) (2MB) [ 0.000000] EFI: mem16: type=3, attr=0xf, range=[0x000000007b726000-0x000000007b728000) (0MB) [ 0.000000] EFI: mem17: type=4, attr=0xf, range=[0x000000007b728000-0x000000007b746000) (0MB) [ 0.000000] EFI: mem18: type=7, attr=0xf, range=[0x000000007b746000-0x000000007b747000) (0MB) [ 0.000000] EFI: mem19: type=4, attr=0xf, range=[0x000000007b747000-0x000000007b786000) (0MB) [ 0.000000] EFI: mem20: type=3, attr=0xf, range=[0x000000007b786000-0x000000007b78f000) (0MB) [ 0.000000] EFI: mem21: type=4, attr=0xf, range=[0x000000007b78f000-0x000000007b793000) (0MB) [ 0.000000] EFI: mem22: type=3, attr=0xf, range=[0x000000007b793000-0x000000007b796000) (0MB) [ 0.000000] EFI: mem23: type=4, attr=0xf, range=[0x000000007b796000-0x000000007b797000) (0MB) [ 0.000000] EFI: mem24: type=3, attr=0xf, range=[0x000000007b797000-0x000000007b79a000) (0MB) [ 0.000000] EFI: mem25: type=4, attr=0xf, range=[0x000000007b79a000-0x000000007b79b000) (0MB) [ 0.000000] EFI: mem26: type=3, attr=0xf, range=[0x000000007b79b000-0x000000007b79d000) (0MB) [ 0.000000] EFI: mem27: type=4, attr=0xf, range=[0x000000007b79d000-0x000000007b79e000) (0MB) [ 0.000000] EFI: mem28: type=3, attr=0xf, range=[0x000000007b79e000-0x000000007b7a0000) (0MB) [ 0.000000] EFI: mem29: type=4, attr=0xf, range=[0x000000007b7a0000-0x000000007bbcf000) (4MB) [ 0.000000] EFI: mem30: type=7, attr=0xf, range=[0x000000007bbcf000-0x000000007bbd1000) (0MB) [ 0.000000] EFI: mem31: type=4, attr=0xf, range=[0x000000007bbd1000-0x000000007f23f000) (54MB) [ 0.000000] EFI: mem32: type=3, attr=0xf, range=[0x000000007f23f000-0x000000007f33f000) (1MB) [ 0.000000] EFI: mem33: type=5, attr=0x800000000000000f, range=[0x000000007f33f000-0x000000007f37e000) (0MB) [ 0.000000] EFI: mem34: type=5, attr=0x800000000000000f, range=[0x000000007f37e000-0x000000007f3bf000) (0MB) [ 0.000000] EFI: mem35: type=6, attr=0x800000000000000f, range=[0x000000007f3bf000-0x000000007f416000) (0MB) [ 0.000000] EFI: mem36: type=6, attr=0x800000000000000f, range=[0x000000007f416000-0x000000007f43f000) (0MB) [ 0.000000] EFI: mem37: type=0, attr=0xf, range=[0x000000007f43f000-0x000000007f4b1000) (0MB) [ 0.000000] EFI: mem38: type=0, attr=0xf, range=[0x000000007f4b1000-0x000000007f4bf000) (0MB) [ 0.000000] EFI: mem39: type=10, attr=0xf, range=[0x000000007f4bf000-0x000000007f584000) (0MB) [ 0.000000] EFI: mem40: type=10, attr=0xf, range=[0x000000007f584000-0x000000007f5bf000) (0MB) [ 0.000000] EFI: mem41: type=9, attr=0xf, range=[0x000000007f5bf000-0x000000007f5e1000) (0MB) [ 0.000000] EFI: mem42: type=9, attr=0xf, range=[0x000000007f5e1000-0x000000007f5f3000) (0MB) [ 0.000000] EFI: mem43: type=4, attr=0xf, range=[0x000000007f5f3000-0x000000007f600000) (0MB) [ 0.000000] EFI: mem44: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB) [ 0.000000] EFI: mem45: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x00000000ffdf0000) (1MB) [ 0.000000] EFI: mem46: type=11, attr=0x8000000000000000, range=[0x00000000ffdf0000-0x00000000ffe00000) (0MB) [ 0.000000] EFI: mem47: type=11, attr=0x8000000000000000, range=[0x00000000ffe00000-0x0000000100000000) (2MB) [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: IEC Mario/Mario, BIOS Mario.03.60.1120.0038G5.0018d 11/04/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask 0FFC00000 write-protect [ 0.000000] 1 base 000000000 mask 0C0000000 write-back [ 0.000000] 2 base 040000000 mask 0C0000000 write-back [ 0.000000] 3 base 07F800000 mask 0FF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Warning only 1919MB will be used. [ 0.000000] Use a HIGHMEM enabled kernel. [ 0.000000] initial memory mapped : 0 - 02000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000077f64000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0077e00000 page 2M [ 0.000000] 0077e00000 - 0077f64000 page 4k [ 0.000000] kernel direct mapping tables up to 77f64000 @ 1ffa000-2000000 [ 0.000000] ACPI: RSDP 7f5f2014 00024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 7f5f2120 00074 (v01 INTEL PineTrlM 00000001 01000013) [ 0.000000] ACPI: FACP 7f5f1000 000F4 (v04 INTEL PineTrlM 00000001 MSFT 01000013) [ 0.000000] ACPI: DSDT 7f5e7000 0610F (v01 INTEL PineTrlM 00000001 MSFT 01000013) [ 0.000000] ACPI: FACS 7f590000 00040 [ 0.000000] ACPI: HPET 7f5f0000 00038 (v01 INTEL PineTrlM 00000001 MSFT 01000013) [ 0.000000] ACPI: APIC 7f5ef000 00078 (v02 INTEL PineTrlM 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG 7f5ee000 0003C (v01 INTEL PineTrlM 00000001 MSFT 01000013) [ 0.000000] ACPI: SLIC 7f5e6000 00176 (v01 INTEL PineTrlM 00000001 MSFT 01000013) [ 0.000000] ACPI: BOOT 7f5e5000 00028 (v01 INTEL PineTrlM 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 7f5e4000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 7f5e3000 001F7 (v02 PmRef Cpu0Tst 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 7f5e2000 00064 (v02 PmRef Cpu1Tst 00003000 INTL 20051117) [ 0.000000] ACPI: WDAT 7f5e1000 00194 (v01 INSYDE INSYDE 00000001 MSFT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1919MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 77f64000 [ 0.000000] low ram: 0 - 77f64000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00077f64 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000008f [ 0.000000] 0: 0x00000090 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x00000f00 [ 0.000000] 0: 0x00001000 -> 0x00077f64 [ 0.000000] On node 0 totalpages: 490995 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3695 pages, LIFO batch:0 [ 0.000000] Normal zone: 3807 pages used for memmap [ 0.000000] Normal zone: 483461 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] Allocating PCI resources starting at 7f600000 (gap: 7f600000:7f71c000) [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6c00000 s25600 r0 d23552 u524288 [ 0.000000] pcpu-alloc: s25600 r0 d23552 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 487156 [ 0.000000] Kernel command line: quiet loglevel=1 console=tty2 init=/sbin/init add_efi_memmap boot=local noresume noswap i915.modeset=1 cros_secure kern_guid=0b303bd7-6817-7f49-9738-d3195c9944fb tpm_tis.force=1 tpm_tis.interrupts=0 nmi_watchdog=panic,lapic root=/dev/dm-0 rootwait ro dm_verity.error_behavior=3 dm_verity.max_bios=-1 dm_verity.dev_wait=1 dm="vroot none ro,0 1740800 verity 0b303bd7-6817-7f49-9738-d3195c9944fb+1 0b303bd7-6817-7f49-9738-d3195c9944fb+1 1740800 0 sha1 0fe0d8e2f7e4e261ae68928f9d13c80d927e6bb7" noinitrd [ 0.000000] dm: will configure 'vroot' on dm-0 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Memory: 1939720k/1965456k available (3451k kernel code, 1489k data, 444k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff66000 - 0xfffff000 ( 612 kB) [ 0.000000] vmalloc : 0xf8764000 - 0xfff64000 ( 120 MB) [ 0.000000] lowmem : 0x80000000 - 0xf7f64000 (1919 MB) [ 0.000000] .init : 0x814d4000 - 0x81543000 ( 444 kB) [ 0.000000] .data : 0x8135ed7d - 0x814d3180 (1489 kB) [ 0.000000] .text : 0x81000000 - 0x8135ed7d (3451 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f6808000 soft=f680a000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty2] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Initial TSC value: 45631542650 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1662.313 MHz processor. [ 0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.62 BogoMIPS (lpj=1662313) [ 0.001014] pid_max: default: 32768 minimum: 301 [ 0.001062] Security Framework initialized [ 0.001101] Mount-cache hash table entries: 512 [ 0.001370] CPU: Physical Processor ID: 0 [ 0.001375] CPU: Processor Core ID: 0 [ 0.001380] mce: CPU supports 5 MCE banks [ 0.001393] CPU0: Thermal monitoring handled by SMI [ 0.001400] using mwait in idle threads. [ 0.002272] ACPI: Core revision 20110112 [ 0.014023] ftrace: allocating 17650 entries in 35 pages [ 0.016076] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.016474] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.026703] CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a [ 0.026998] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver. [ 0.026998] ... version: 3 [ 0.026998] ... bit width: 40 [ 0.026998] ... generic registers: 2 [ 0.026998] ... value mask: 000000ffffffffff [ 0.026998] ... max period: 000000007fffffff [ 0.026998] ... fixed-purpose events: 3 [ 0.026998] ... event mask: 0000000700000003 [ 0.026998] NMI watchdog enabled, takes one hw-pmu counter. [ 0.026998] CPU 1 irqstacks, hard=f68f0000 soft=f68f2000 [ 0.026998] Booting Node 0, Processors #1 [ 0.001999] Initializing CPU#1 [ 0.001999] CPU1: Thermal monitoring handled by SMI [ 0.098039] NMI watchdog enabled, takes one hw-pmu counter. [ 0.098100] Brought up 2 CPUs [ 0.098107] Total of 2 processors activated (6649.45 BogoMIPS). [ 0.098419] devtmpfs: initialized [ 0.098452] Time: 2:01:00 Date: 09/25/11 [ 0.098530] NET: Registered protocol family 16 [ 0.099053] preserved: reserved 1MB at 0xf00000 (virtual 80f00000) [ 0.099341] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.099348] ACPI: bus type pci registered [ 0.099474] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.099481] PCI: not using MMCONFIG [ 0.099796] PCI: Using configuration type 1 for base access [ 0.102399] bio: create slab at 0 [ 0.105501] ACPI: EC: Look up EC in DSDT [ 0.108171] ACPI: Executed 1 blocks of module-level executable AML code [ 0.110952] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.111766] ACPI: SSDT 7f4b4c98 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.112451] ACPI: Dynamic OEM Table Load: [ 0.112459] ACPI: SSDT (null) 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.112738] ACPI: SSDT 7f4b3e18 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.113380] ACPI: Dynamic OEM Table Load: [ 0.113388] ACPI: SSDT (null) 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.119634] ACPI: SSDT 7f4b4f18 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.120298] ACPI: Dynamic OEM Table Load: [ 0.120306] ACPI: SSDT (null) 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.120571] ACPI: SSDT 7f4b2f18 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.121220] ACPI: Dynamic OEM Table Load: [ 0.121228] ACPI: SSDT (null) 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.684045] ACPI: Interpreter enabled [ 0.684054] ACPI: (supports S0 S3 S5) [ 0.684099] ACPI: Using IOAPIC for interrupt routing [ 0.684147] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.684579] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.684585] PCI: Using MMCONFIG for extended config space [ 0.694994] ACPI: Power Resource [FN00] (off) [ 0.694963] ACPI: Power Resource [FN01] (off) [ 0.695960] ACPI: Power Resource [FN02] (off) [ 0.696125] ACPI: Power Resource [FN03] (off) [ 0.696960] ACPI: Power Resource [FN04] (off) [ 0.701265] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.704219] ACPI: No dock devices found. [ 0.704228] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.705209] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.706840] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.706848] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.706855] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.706863] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] [ 0.706891] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600 [ 0.706956] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300 [ 0.706972] pci 0000:00:02.0: reg 10: [mem 0x92180000-0x921fffff] [ 0.706982] pci 0000:00:02.0: reg 14: [io 0x20c0-0x20c7] [ 0.706992] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff pref] [ 0.707003] pci 0000:00:02.0: reg 1c: [mem 0x92000000-0x920fffff] [ 0.707046] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380 [ 0.707060] pci 0000:00:02.1: reg 10: [mem 0x92100000-0x9217ffff] [ 0.707174] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 [ 0.707204] pci 0000:00:1b.0: reg 10: [mem 0x92200000-0x92203fff 64bit] [ 0.707304] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.707313] pci 0000:00:1b.0: PME# disabled [ 0.707350] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 [ 0.707453] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.707461] pci 0000:00:1c.0: PME# disabled [ 0.707508] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 [ 0.707577] pci 0000:00:1d.0: reg 20: [io 0x2080-0x209f] [ 0.707632] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 [ 0.707701] pci 0000:00:1d.1: reg 20: [io 0x2060-0x207f] [ 0.707756] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 [ 0.707825] pci 0000:00:1d.2: reg 20: [io 0x2040-0x205f] [ 0.707883] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 [ 0.707957] pci 0000:00:1d.3: reg 20: [io 0x2020-0x203f] [ 0.708026] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 [ 0.708058] pci 0000:00:1d.7: reg 10: [mem 0x92204400-0x922047ff] [ 0.708164] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.708173] pci 0000:00:1d.7: PME# disabled [ 0.708207] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.708310] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601 [ 0.708463] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106 [ 0.708494] pci 0000:00:1f.2: reg 10: [io 0x20b8-0x20bf] [ 0.708511] pci 0000:00:1f.2: reg 14: [io 0x20cc-0x20cf] [ 0.708528] pci 0000:00:1f.2: reg 18: [io 0x20b0-0x20b7] [ 0.708545] pci 0000:00:1f.2: reg 1c: [io 0x20c8-0x20cb] [ 0.708562] pci 0000:00:1f.2: reg 20: [io 0x20a0-0x20af] [ 0.708579] pci 0000:00:1f.2: reg 24: [mem 0x92204000-0x922043ff] [ 0.708631] pci 0000:00:1f.2: PME# supported from D3hot [ 0.708639] pci 0000:00:1f.2: PME# disabled [ 0.708668] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 [ 0.708737] pci 0000:00:1f.3: reg 20: [io 0x2000-0x201f] [ 0.708885] pci 0000:01:00.0: [168c:002a] type 0 class 0x000280 [ 0.708930] pci 0000:01:00.0: reg 10: [mem 0x91000000-0x9100ffff 64bit] [ 0.709063] pci 0000:01:00.0: supports D1 [ 0.709068] pci 0000:01:00.0: PME# supported from D0 D1 D3hot [ 0.709078] pci 0000:01:00.0: PME# disabled [ 0.709113] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.709121] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.709130] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.709140] pci 0000:00:1c.0: bridge window [mem 0x91000000-0x91ffffff] [ 0.709153] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref] [ 0.709253] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) [ 0.709263] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.709272] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.709285] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.709293] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.709299] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.709306] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.709313] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode) [ 0.709335] pci_bus 0000:00: on NUMA node 0 [ 0.709343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.709618] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 0.709800] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.710157] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.710629] pci0000:00: ACPI _OSC control (0x1c) granted [ 0.715838] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.715997] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) [ 0.716140] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.716284] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.716428] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.716573] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.716718] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.716871] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.717214] SCSI subsystem initialized [ 0.717243] libata version 3.00 loaded. [ 0.717243] usbcore: registered new interface driver usbfs [ 0.717243] usbcore: registered new interface driver hub [ 0.717243] usbcore: registered new device driver usb [ 0.717243] chromeos_acpi: falling back to default list of methods [ 0.717243] chromeos_acpi: registering CHSW 0 [ 0.718422] chromeos_acpi: registering CHNV 0 [ 0.718573] chromeos_acpi: failed to retrieve MLST (5) [ 0.718612] chromeos_acpi: installed (legacy mode) [ 0.718657] Advanced Linux Sound Architecture Driver Version 1.0.23. [ 0.718662] PCI: Using ACPI for IRQ routing [ 0.718669] PCI: pci_cache_line_size set to 64 bytes [ 0.718767] reserve RAM buffer: 000000000008f000 - 000000000008ffff [ 0.718774] reserve RAM buffer: 000000007f33f000 - 000000007fffffff [ 0.718781] reserve RAM buffer: 000000007f600000 - 000000007fffffff [ 0.719130] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.719142] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.719153] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.721936] Switching to clocksource hpet [ 0.722734] Switched to NOHz mode on CPU #0 [ 0.722806] Switched to NOHz mode on CPU #1 [ 0.725587] pnp: PnP ACPI init [ 0.725631] ACPI: bus type pnp registered [ 0.726982] pnp 00:00: [bus 00-ff] [ 0.726991] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.726997] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.727003] pnp 00:00: [io 0x0d00-0xffff window] [ 0.727027] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.727034] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.727040] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.727046] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.727052] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.727058] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.727065] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.727071] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.727077] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.727083] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.727089] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.727095] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.727101] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.727108] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.727114] pnp 00:00: [mem 0x80000000-0xfebfffff window] [ 0.727258] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.727569] pnp 00:01: [io 0x164e-0x164f] [ 0.727575] pnp 00:01: [io 0x0061] [ 0.727581] pnp 00:01: [io 0x0070] [ 0.727586] pnp 00:01: [io 0x0080] [ 0.727591] pnp 00:01: [io 0x0092] [ 0.727596] pnp 00:01: [io 0x00b2-0x00b3] [ 0.727601] pnp 00:01: [io 0x0063] [ 0.727606] pnp 00:01: [io 0x0065] [ 0.727611] pnp 00:01: [io 0x0067] [ 0.727616] pnp 00:01: [io 0x0600-0x060f] [ 0.727621] pnp 00:01: [io 0x0610] [ 0.727626] pnp 00:01: [io 0x0800-0x080f] [ 0.727632] pnp 00:01: [io 0x0810-0x0817] [ 0.727637] pnp 00:01: [io 0x0400-0x047f] [ 0.727642] pnp 00:01: [io 0x0500-0x053f] [ 0.727648] pnp 00:01: [io 0x0700-0x0701] [ 0.727654] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 0.727659] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] [ 0.727665] pnp 00:01: [mem 0xfed14000-0xfed17fff] [ 0.727671] pnp 00:01: [mem 0xfed18000-0xfed18fff] [ 0.727677] pnp 00:01: [mem 0xfed19000-0xfed19fff] [ 0.727682] pnp 00:01: [mem 0xfec00000-0xfec00fff] [ 0.727688] pnp 00:01: [mem 0xfee00000-0xfee00fff] [ 0.727720] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.0 BAR 7 [io 0x1000-0x1fff] [ 0.727844] system 00:01: [io 0x0600-0x060f] has been reserved [ 0.727852] system 00:01: [io 0x0610] has been reserved [ 0.727859] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.727867] system 00:01: [io 0x0810-0x0817] has been reserved [ 0.727874] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.727881] system 00:01: [io 0x0500-0x053f] has been reserved [ 0.727888] system 00:01: [io 0x0700-0x0701] has been reserved [ 0.727897] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.727905] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.727913] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.727921] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.727928] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.727936] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.727944] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.727952] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.727985] pnp 00:02: [io 0x0000-0x001f] [ 0.727991] pnp 00:02: [io 0x0081-0x0091] [ 0.727996] pnp 00:02: [io 0x0093-0x009f] [ 0.728001] pnp 00:02: [io 0x00c0-0x00df] [ 0.728028] pnp 00:02: [dma 4] [ 0.728104] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.728165] pnp 00:03: [io 0x0070-0x0077] [ 0.728236] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.728392] pnp 00:04: [irq 0 disabled] [ 0.728411] pnp 00:04: [irq 8] [ 0.728417] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.728489] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.728519] pnp 00:05: [io 0x00f0] [ 0.728531] pnp 00:05: [irq 13] [ 0.728604] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.728632] pnp 00:06: [mem 0xff800000-0xffffffff] [ 0.728712] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active) [ 0.728765] pnp 00:07: [io 0x0060] [ 0.728771] pnp 00:07: [io 0x0064] [ 0.728782] pnp 00:07: [irq 1] [ 0.728857] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.728904] pnp 00:08: [irq 12] [ 0.728984] pnp 00:08: Plug and Play ACPI device, IDs AUI1700 SYN1e00 SYN0002 PNP0f13 (active) [ 0.729162] pnp: PnP ACPI: found 9 devices [ 0.729167] ACPI: ACPI bus type pnp unregistered [ 0.768840] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.768850] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.768862] pci 0000:00:1c.0: bridge window [mem 0x91000000-0x91ffffff] [ 0.768872] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref] [ 0.768885] pci 0000:00:1e.0: PCI bridge to [bus 02-02] [ 0.768890] pci 0000:00:1e.0: bridge window [io disabled] [ 0.768899] pci 0000:00:1e.0: bridge window [mem disabled] [ 0.768907] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.768949] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.768960] pci 0000:00:1c.0: setting latency timer to 64 [ 0.768974] pci 0000:00:1e.0: setting latency timer to 64 [ 0.768983] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.768989] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.768995] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.769002] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 0.769024] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.769031] pci_bus 0000:01: resource 1 [mem 0x91000000-0x91ffffff] [ 0.769037] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff 64bit pref] [ 0.769044] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.769050] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.769056] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.769063] pci_bus 0000:02: resource 7 [mem 0x80000000-0xfebfffff] [ 0.769123] NET: Registered protocol family 2 [ 0.769192] IP route cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.769615] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.771517] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.771944] TCP: Hash tables configured (established 262144 bind 65536) [ 0.771949] TCP reno registered [ 0.771958] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.771989] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.772241] NET: Registered protocol family 1 [ 0.772273] pci 0000:00:02.0: Boot video device [ 0.772430] PCI: CLS 64 bytes, default 64 [ 0.772571] Simple Boot Flag at 0x44 set to 0x1 [ 0.773467] microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x107 [ 0.773481] microcode: CPU1 sig=0x106ca, pf=0x4, revision=0x107 [ 0.773547] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.779687] msgmni has been set to 3788 [ 0.780270] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.780277] io scheduler noop registered [ 0.780281] io scheduler deadline registered [ 0.780318] io scheduler cfq registered (default) [ 0.780459] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.780538] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.780781] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.780788] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.780797] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.780846] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.780912] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.781238] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.781439] ACPI: AC Adapter [AC] (off-line) [ 0.781902] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.787046] ACPI: Power Button [PWRB] [ 0.787235] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.787244] ACPI: Sleep Button [SLPB] [ 0.787385] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 0.788090] ACPI: Lid Switch [LID] [ 0.788268] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.788277] ACPI: Power Button [PWRF] [ 0.788744] ACPI: Fan [FAN0] (off) [ 0.789156] ACPI: Fan [FAN1] (off) [ 0.789657] ACPI: Fan [FAN2] (off) [ 0.790309] ACPI: Fan [FAN3] (off) [ 0.790919] ACPI: Fan [FAN4] (off) [ 0.790941] ACPI: acpi_idle registered with cpuidle [ 0.794986] Marking TSC unstable due to TSC halts in idle [ 0.800425] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.800434] ACPI: Thermal Zone [THRM] (26 C) [ 0.801224] Non-volatile memory driver v1.3 [ 0.801324] Linux agpgart interface v0.103 [ 0.801426] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset [ 0.801856] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 0.802280] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 0.802643] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 [ 0.803108] tpm_tis tpm_tis: 1.2 TPM (device-id 0xB, rev-id 16) [ 0.818722] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.818738] ACPI: Battery Slot [BAT0] (battery present) [ 0.905150] [drm] Initialized drm 1.1.0 20060810 [ 0.905190] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.905198] i915 0000:00:02.0: setting latency timer to 64 [ 0.976217] i915 0000:00:02.0: irq 41 for MSI/MSI-X [ 0.976228] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.976233] [drm] Driver supports precise vblank timestamp query. [ 1.038246] [drm] initialized overlay support [ 1.329959] Console: switching to colour frame buffer device 160x50 [ 1.342313] fb0: inteldrmfb frame buffer device [ 1.342317] drm: registered panic notifier [ 1.342329] No ACPI video bus found [ 1.342617] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.344246] loop: module loaded [ 1.344393] ahci 0000:00:1f.2: version 3.0 [ 1.344436] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.344516] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 1.344570] ahci: SSS flag set, parallel bus scan disabled [ 1.344613] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode [ 1.344622] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part [ 1.344632] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.345859] scsi0 : ahci [ 1.346148] scsi1 : ahci [ 1.346327] scsi2 : ahci [ 1.346505] scsi3 : ahci [ 1.346946] ata1: SATA max UDMA/133 abar m1024@0x92204000 port 0x92204100 irq 42 [ 1.346952] ata2: DUMMY [ 1.346956] ata3: DUMMY [ 1.346959] ata4: DUMMY [ 1.347341] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.347380] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.347419] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.347427] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.347557] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.352096] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 1.352127] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.356031] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.356066] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x92204400 [ 1.365065] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.365143] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.365149] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.365155] usb usb1: Product: EHCI Host Controller [ 1.365160] usb usb1: Manufacturer: Linux 2.6.38.3+ ehci_hcd [ 1.365165] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.365403] hub 1-0:1.0: USB hub found [ 1.365414] hub 1-0:1.0: 8 ports detected [ 1.365601] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.365636] uhci_hcd: USB Universal Host Controller Interface driver [ 1.365700] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.365714] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.365722] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.365834] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.370080] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00002080 [ 1.370180] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.370187] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.370193] usb usb2: Product: UHCI Host Controller [ 1.370198] usb usb2: Manufacturer: Linux 2.6.38.3+ uhci_hcd [ 1.370203] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.370431] hub 2-0:1.0: USB hub found [ 1.370442] hub 2-0:1.0: 2 ports detected [ 1.370583] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.370597] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.370604] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.370708] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.378102] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00002060 [ 1.378192] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.378199] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.378204] usb usb3: Product: UHCI Host Controller [ 1.378209] usb usb3: Manufacturer: Linux 2.6.38.3+ uhci_hcd [ 1.378214] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.378449] hub 3-0:1.0: USB hub found [ 1.378460] hub 3-0:1.0: 2 ports detected [ 1.378623] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.378637] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.378645] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.378743] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.386110] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 [ 1.386197] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.386204] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.386209] usb usb4: Product: UHCI Host Controller [ 1.386214] usb usb4: Manufacturer: Linux 2.6.38.3+ uhci_hcd [ 1.386219] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.386449] hub 4-0:1.0: USB hub found [ 1.386459] hub 4-0:1.0: 2 ports detected [ 1.386615] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.386629] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.386636] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.386734] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.394101] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00002020 [ 1.394191] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.394198] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.394204] usb usb5: Product: UHCI Host Controller [ 1.394209] usb usb5: Manufacturer: Linux 2.6.38.3+ uhci_hcd [ 1.394214] usb usb5: SerialNumber: 0000:00:1d.3 [ 1.394450] hub 5-0:1.0: USB hub found [ 1.394461] hub 5-0:1.0: 2 ports detected [ 1.394660] usbcore: registered new interface driver cdc_acm [ 1.394665] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.394670] Initializing USB Mass Storage driver... [ 1.394736] usbcore: registered new interface driver usb-storage [ 1.394741] USB Mass Storage support registered. [ 1.394806] usbcore: registered new interface driver libusual [ 1.394839] usbcore: registered new interface driver ums-realtek [ 1.394911] usbcore: registered new interface driver usbserial [ 1.394935] USB Serial support registered for generic [ 1.394969] usbcore: registered new interface driver usbserial_generic [ 1.394973] usbserial: USB Serial Driver core [ 1.395089] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 [ 1.398956] i8042: Detected active multiplexing controller, rev 1.1 [ 1.401521] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.401537] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.401613] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.401683] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.401757] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.402045] mousedev: PS/2 mouse device common for all mice [ 1.402611] coretemp coretemp.0: Unable to read TjMax from CPU. [ 1.402620] coretemp coretemp.0: Using relative temperature scale! [ 1.403101] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 1.403201] device-mapper: verity: dm-verity registered [ 1.403206] device-mapper: verity-chromeos: dm-verity-chromeos registered [ 1.403373] cpuidle: using governor ladder [ 1.403647] cpuidle: using governor menu [ 1.403798] usbcore: registered new interface driver usbhid [ 1.403803] usbhid: USB HID core driver [ 1.403807] ALSA device list: [ 1.403810] No soundcards found. [ 1.403850] Netfilter messages via NETLINK v0.30. [ 1.403881] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.404217] ctnetlink v0.93: registering with nfnetlink. [ 1.404354] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.404420] TCP cubic registered [ 1.404424] Initializing XFRM netlink socket [ 1.404434] NET: Registered protocol family 17 [ 1.405323] Using IPI No-Shortcut mode [ 1.405939] Magic number: 11:68:6 [ 1.440923] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.457142] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.457993] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.458299] ata1.00: ATA-8: SanDisk SSD P4 16GB, SSD 8.00, max UDMA/133 [ 1.458311] ata1.00: 31277232 sectors, multi 1: LBA48 [ 1.459398] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.459499] ata1.00: configured for UDMA/133 [ 1.459909] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD P4 1 SSD PQ: 0 ANSI: 5 [ 1.460617] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 1.461056] sd 0:0:0:0: [sda] Write Protect is off [ 1.461071] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.461221] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.466176] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 [ 1.468564] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.468612] dm: attempting early device configuration. [ 1.469240] device-mapper: init: adding target '0 1740800 verity 0b303bd7-6817-7f49-9738-d3195c9944fb+1 0b303bd7-6817-7f49-9738-d3195c9944fb+1 1740800 0 sha1 0fe0d8e2f7e4e261ae68928f9d13c80d927e6bb7' [ 1.469458] device-mapper: verity: dev:sda3 hash:sda3 [sectors:13720 blocks:217600] [ 1.469645] dm: dm-0 is ready [ 1.479961] VFS: Mounted root (ext2 filesystem) readonly on device 254:0. [ 1.482846] devtmpfs: mounted [ 1.483055] Freeing unused kernel memory: 444k freed [ 1.483567] Write protecting the kernel text: 3452k [ 1.483677] Write protecting the kernel read-only data: 1264k [ 1.483686] NX-protecting the kernel data: 2692k [ 1.667097] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 1.769504] <30>udevd[56]: starting version 170 [ 1.784005] usb 1-2: config 1 has an invalid interface number: 1 but max is 0 [ 1.784038] usb 1-2: config 1 has no interface number 0 [ 1.786358] usb 1-2: New USB device found, idVendor=1410, idProduct=a014 [ 1.786368] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 1.786376] usb 1-2: Product: Gobi 2000 [ 1.786382] usb 1-2: Manufacturer: Qualcomm Incorporated [ 1.816663] EXT3-fs: barriers not enabled [ 1.891080] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 2.027063] qcserial: loaded [ 2.027123] USB Serial support registered for Qualcomm USB modem [ 2.027181] qcserial 1-2:1.1: Qualcomm USB modem converter detected [ 2.027806] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB0 [ 2.027867] usbcore: registered new interface driver qcserial [ 2.259398] usb 1-3: New USB device found, idVendor=0bda, idProduct=0138 [ 2.259407] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.259413] usb 1-3: Product: USB2.0-CRW [ 2.259418] usb 1-3: Manufacturer: Generic [ 2.259422] usb 1-3: SerialNumber: 20090516388200000 [ 2.265969] ums-realtek 1-3:1.0: This device (0bda,0138,3882 S 06 P 50) has an unneeded SubClass entry in unusual_devs.h (kernel 2.6.38.3+) [ 2.265976] Please send a copy of this message to and [ 2.283885] scsi4 : usb-storage 1-3:1.0 [ 2.331471] Synaptics Touchpad, model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0x5a0400 [ 2.366356] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5 [ 2.386063] usb 1-5: new high speed USB device using ehci_hcd and address 4 [ 2.731064] usb 1-5: New USB device found, idVendor=04f2, idProduct=b262 [ 2.731083] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 2.731097] usb 1-5: Product: Mario Webcam [ 2.731126] usb 1-5: Manufacturer: Chicony Electronics Co., Ltd. [ 2.803640] Linux video capture interface: v2.00 [ 2.821967] uvcvideo: Found UVC 1.00 device Mario Webcam (04f2:b262) [ 2.832305] usbcore: registered new interface driver uvcvideo [ 2.832314] USB Video Class driver (v1.0.0) [ 3.044092] usb 5-2: new full speed USB device using uhci_hcd and address 2 [ 3.089341] Synaptics Touchpad, model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0x5a0400 [ 3.123581] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 [ 3.166651] serio_raw: raw access enabled on isa0060/serio4 (serio_raw0, minor 1) [ 3.167508] serio_raw: raw access enabled on isa0060/serio4 (serio_raw1, minor 1) [ 3.180676] usb 5-2: New USB device found, idVendor=0cf3, idProduct=3000 [ 3.180688] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.185053] usb 1-3: USB disconnect, address 3 [ 3.236074] Stop polling thread! [ 3.236140] Polling thread stopped! [ 3.261365] Bluetooth: Atheros AR30xx firmware driver ver 1.0 [ 3.523802] usbcore: registered new interface driver ath3k [ 3.629246] kjournald starting. Commit interval 600 seconds [ 3.629715] EXT3-fs (sda1): using internal journal [ 3.629726] EXT3-fs (sda1): recovery complete [ 3.630422] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 3.705121] usb 5-2: USB disconnect, address 2 [ 3.922567] i2c /dev entries driver [ 3.963288] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.980573] i2c i2c-14: new_device: Instantiated device tsl2563 at 0x29 [ 3.984410] nm10_gpio version 0.04 built on Sep 19 2011 at 17:53:03 [ 3.984432] gpiochip_find_base: found new base at 192 [ 4.015338] industrialio: module is from the staging directory, the quality is unknown, you have been warned. [ 4.030044] tsl2563: module is from the staging directory, the quality is unknown, you have been warned. [ 4.063069] tsl2563 14-0029: model 4, rev. 0 [ 4.083176] i2c-core: driver [tsl2563] using legacy suspend method [ 4.083184] i2c-core: driver [tsl2563] using legacy resume method [ 4.126791] cfg80211: Calling CRDA to update world regulatory domain [ 4.197896] cfg80211: World regulatory domain updated: [ 4.197906] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4.197917] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.197927] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4.197936] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4.197946] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.197955] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.225805] init: chrontel pre-start process (242) terminated with status 1 [ 4.433789] ath9k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.433811] ath9k 0000:01:00.0: setting latency timer to 64 [ 4.872319] ath: EEPROM regdomain: 0x60 [ 4.872327] ath: EEPROM indicates we should expect a direct regpair map [ 4.872336] ath: Country alpha2 being used: 00 [ 4.872341] ath: Regpair used: 0x60 [ 4.905865] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 4.906689] Registered led device: ath9k-phy0::radio [ 4.906774] Registered led device: ath9k-phy0::assoc [ 4.906877] Registered led device: ath9k-phy0::tx [ 4.906959] Registered led device: ath9k-phy0::rx [ 4.906977] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf9160000, irq=16 [ 4.936051] usb 5-2: new full speed USB device using uhci_hcd and address 3 [ 5.076753] usb 5-2: New USB device found, idVendor=0cf3, idProduct=3005 [ 5.076764] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.314646] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 5.324348] Bluetooth: Core ver 2.15 [ 5.324433] NET: Registered protocol family 31 [ 5.324439] Bluetooth: HCI device and connection manager initialized [ 5.324446] Bluetooth: HCI socket layer initialized [ 5.413720] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 5.417514] usbcore: registered new interface driver btusb [ 5.677693] usb 1-2: USB disconnect, address 2 [ 5.677986] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0 [ 5.678077] qcserial 1-2:1.1: device disconnected [ 5.991071] usb 1-2: new high speed USB device using ehci_hcd and address 7 [ 6.107267] usb 1-2: New USB device found, idVendor=1410, idProduct=a010 [ 6.107279] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 6.107287] usb 1-2: Product: Gobi 2000 [ 6.107293] usb 1-2: Manufacturer: Qualcomm Incorporated [ 6.109393] usb 1-2: unknown number of interfaces: 4 [ 6.110256] qcserial 1-2:1.1: Qualcomm USB modem converter detected [ 6.110545] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB0 [ 6.111398] qcserial 1-2:1.2: Qualcomm USB modem converter detected [ 6.111697] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB1 [ 6.112607] qcserial 1-2:1.3: Qualcomm USB modem converter detected [ 6.112854] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB2 [ 6.367194] gobi: 1.0.110+google+w0 [ 6.369458] gobi 1-2:1.0: usb0: register 'gobi' at usb-0000:00:1d.7-2, QCUSBNet Ethernet Device, 5a:75:e8:34:4d:b1 [ 8.029624] ata1.00: configured for UDMA/133 [ 8.029637] ata1: EH complete [ 8.030046] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 8.184972] NET: Registered protocol family 10 [ 8.186430] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.139808] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 9.165347] fuse init (API version 7.16) [ 9.386709] rtc_cmos 00:03: RTC can wake from S4 [ 9.412092] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 9.412149] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 9.682399] creating qcqmi0 [ 9.682630] usbcore: registered new interface driver gobi [ 10.352796] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.352934] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 10.352996] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 10.393803] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load [ 10.533710] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 11.405195] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 11.405665] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 11.406488] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 11.406976] uhci_hcd 0000:00:1d.3: PCI INT D disabled [ 13.704197] gobi: int_callback: urb status = -2 [ 15.726033] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 15.726088] ehci_hcd 0000:00:1d.7: PME# enabled [ 59.097887] chrome-sandbox (2595): /proc/2593/oom_adj is deprecated, please use /proc/2593/oom_score_adj instead. [ 67.455332] wlan0: authenticate with 00:19:06:20:e1:f0 (try 1) [ 67.478551] wlan0: authenticated [ 67.543170] wlan0: associate with 00:19:06:20:e1:f0 (try 1) [ 67.545046] wlan0: RX AssocResp from 00:19:06:20:e1:f0 (capab=0x111 status=0 aid=76) [ 67.545056] wlan0: associated [ 67.555733] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 657.840170] PM: Syncing filesystems ... done. [ 657.856525] PM: Preparing system for mem sleep [ 657.856982] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 657.868167] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 657.879144] PM: Entering mem sleep [ 657.879172] Suspending console(s) (use no_console_suspend to debug) [ 657.879455] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 657.879472] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 657.879651] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 657.879667] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 657.879838] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 657.879854] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 657.880090] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 657.880106] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 657.891157] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0x92204400-0x922047ff] (PCI address [0x92204400-0x922047ff]) [ 657.891187] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 657.891226] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 657.891352] ehci_hcd 0000:00:1d.7: PME# disabled [ 657.891375] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 657.891390] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 657.909243] sd 0:0:0:0: [sda] Stopping disk [ 657.970983] gobi: int_callback: urb status = -2 [ 658.039622] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 658.039647] uhci_hcd 0000:00:1d.3: PCI INT D disabled [ 658.039711] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 658.039739] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 658.039766] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 658.039946] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 658.051126] PM: suspend of devices complete after 159.404 msecs [ 658.073314] PM: late suspend of devices complete after 22.169 msecs [ 658.073374] ACPI: Preparing to enter system sleep state S3 [ 658.074440] PM: Saving platform NVS memory [ 658.074450] Disabling non-boot CPUs ... [ 658.088312] CPU 1 is now offline [ 658.089053] Back to C! [ 658.089053] PM: Restoring platform NVS memory [ 658.089053] CPU0: Thermal monitoring handled by SMI [ 658.089053] Enabling non-boot CPUs ... [ 658.089053] Booting Node 0 Processor 1 APIC 0x1 [ 658.088059] Initializing CPU#1 [ 658.088059] Calibrating delay loop (skipped) already calibrated this CPU previously.. [ 658.088059] CPU1: Thermal monitoring handled by SMI [ 658.101027] Switched to NOHz mode on CPU #1 [ 658.113210] NMI watchdog enabled, takes one hw-pmu counter. [ 658.114098] CPU1 is up [ 658.114317] ACPI: Waking up from system sleep state S3 [ 658.377451] agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900006, writing 0x20900006) [ 658.377501] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 658.377615] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 658.377674] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff) [ 658.377703] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x90f19001) [ 658.377721] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0x91f09100) [ 658.377740] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x1010) [ 658.377758] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x10100) [ 658.377784] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 658.377886] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 658.377949] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 658.378037] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 658.378100] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 658.378165] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0x92204400) [ 658.378188] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [ 658.378237] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x0, writing 0xff) [ 658.378376] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0x92200000, writing 0x92204000) [ 658.378408] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 658.378532] ath9k 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 658.378576] ath9k 0000:01:00.0: restoring config space at offset 0x4 (was 0x4, writing 0x91000004) [ 658.378595] ath9k 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 658.378617] ath9k 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 658.378847] PM: early resume of devices complete after 1.474 msecs [ 658.379093] i915 0000:00:02.0: setting latency timer to 64 [ 658.379473] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 658.379491] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 658.379590] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 658.379708] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 658.379726] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 658.379765] usb usb2: root hub lost power or was reset [ 658.379799] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 658.379816] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 658.379853] usb usb3: root hub lost power or was reset [ 658.379883] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 658.379901] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 658.379937] usb usb4: root hub lost power or was reset [ 658.379967] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 658.379985] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 658.380012] usb usb5: root hub lost power or was reset [ 658.380105] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 658.380123] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 658.380230] pci 0000:00:1e.0: setting latency timer to 64 [ 658.380273] ahci 0000:00:1f.2: setting latency timer to 64 [ 658.398511] sd 0:0:0:0: [sda] Starting disk [ 658.511383] No ACPI video bus found [ 658.515354] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 658.518921] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 658.520307] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 658.520396] ata1.00: configured for UDMA/133 [ 658.521209] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 658.682927] PM: resume of devices complete after 303.957 msecs [ 658.683754] wlan0: deauthenticated from 00:19:06:20:e1:f0 (Reason: 2) [ 658.698821] PM: Finishing wakeup. [ 658.698830] Restarting tasks ... [ 658.703631] usb 1-2: USB disconnect, address 7 [ 658.703861] gobi 1-2:1.0: usb0: unregister 'gobi' usb-0000:00:1d.7-2, QCUSBNet Ethernet Device [ 658.706859] done. [ 658.728105] gobi: write_sync: unable to resume interface: -11 (cid=0x0000) [ 658.728115] gobi: cid_free: failed to write releasecid request: -11 [ 658.728122] gobi: wds_callback: no read found [ 658.728523] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0 [ 658.728573] qcserial 1-2:1.1: device disconnected [ 658.728822] qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1 [ 658.728866] qcserial 1-2:1.2: device disconnected [ 658.729130] qcserial ttyUSB2: Qualcomm USB modem converter now disconnected from ttyUSB2 [ 658.729174] qcserial 1-2:1.3: device disconnected [ 658.744613] cfg80211: Calling CRDA to update world regulatory domain [ 658.831071] usb 1-2: new high speed USB device using ehci_hcd and address 8 [ 658.848384] cfg80211: World regulatory domain updated: [ 658.848394] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 658.848404] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 658.848412] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 658.848420] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 658.848428] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 658.848436] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 658.947859] usb 1-2: config 1 has an invalid interface number: 1 but max is 0 [ 658.947870] usb 1-2: config 1 has no interface number 0 [ 658.950099] usb 1-2: New USB device found, idVendor=1410, idProduct=a014 [ 658.950109] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 658.950117] usb 1-2: Product: Gobi 2000 [ 658.950123] usb 1-2: Manufacturer: Qualcomm Incorporated [ 658.952129] qcserial 1-2:1.1: Qualcomm USB modem converter detected [ 658.952390] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB0 [ 659.054102] usb 1-3: new high speed USB device using ehci_hcd and address 9 [ 659.182886] usb 1-3: New USB device found, idVendor=0bda, idProduct=0138 [ 659.182899] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 659.182907] usb 1-3: Product: USB2.0-CRW [ 659.182914] usb 1-3: Manufacturer: Generic [ 659.182921] usb 1-3: SerialNumber: 20090516388200000 [ 659.197096] ums-realtek 1-3:1.0: This device (0bda,0138,3882 S 06 P 50) has an unneeded SubClass entry in unusual_devs.h (kernel 2.6.38.3+) [ 659.197102] Please send a copy of this message to and [ 659.222234] scsi5 : usb-storage 1-3:1.0 [ 659.222902] usb 1-5: USB disconnect, address 4 [ 659.334154] usb 1-5: new high speed USB device using ehci_hcd and address 10 [ 659.679118] usb 1-5: New USB device found, idVendor=04f2, idProduct=b262 [ 659.679133] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 659.679144] usb 1-5: Product: Mario Webcam [ 659.679152] usb 1-5: Manufacturer: Chicony Electronics Co., Ltd. [ 659.682164] uvcvideo: Found UVC 1.00 device Mario Webcam (04f2:b262) [ 659.692281] usb 5-2: USB disconnect, address 3 [ 659.900094] usb 5-2: new full speed USB device using uhci_hcd and address 4 [ 660.044261] usb 5-2: New USB device found, idVendor=0cf3, idProduct=3000 [ 660.044276] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 660.320524] usb 1-3: USB disconnect, address 9 [ 660.370068] Stop polling thread! [ 660.370116] Polling thread stopped! [ 660.500154] usb 5-2: USB disconnect, address 4 [ 661.706114] usb 5-2: new full speed USB device using uhci_hcd and address 5 [ 661.844270] usb 5-2: New USB device found, idVendor=0cf3, idProduct=3005 [ 661.844285] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 662.000292] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 662.000483] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 662.000609] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 662.508976] usb 1-2: USB disconnect, address 8 [ 662.509507] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0 [ 662.509605] qcserial 1-2:1.1: device disconnected [ 662.822168] usb 1-2: new high speed USB device using ehci_hcd and address 12 [ 662.937862] usb 1-2: New USB device found, idVendor=1410, idProduct=a010 [ 662.937878] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 662.937888] usb 1-2: Product: Gobi 2000 [ 662.937896] usb 1-2: Manufacturer: Qualcomm Incorporated [ 662.940278] usb 1-2: unknown number of interfaces: 4 [ 662.942410] gobi 1-2:1.0: usb0: register 'gobi' at usb-0000:00:1d.7-2, QCUSBNet Ethernet Device, 5a:75:e8:34:4d:b1 [ 666.011143] uhci_hcd 0000:00:1d.3: PCI INT D disabled [ 666.455579] creating qcqmi0 [ 666.456909] qcserial 1-2:1.1: Qualcomm USB modem converter detected [ 666.457443] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB0 [ 666.459114] qcserial 1-2:1.2: Qualcomm USB modem converter detected [ 666.459599] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB1 [ 666.460801] qcserial 1-2:1.3: Qualcomm USB modem converter detected [ 666.461297] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB2 [ 667.628087] wlan0: authenticate with 00:19:06:20:e1:f0 (try 1) [ 667.629199] wlan0: authenticated [ 667.647954] wlan0: associate with 00:19:06:20:e1:f0 (try 1) [ 667.649584] wlan0: RX ReassocResp from 00:19:06:20:e1:f0 (capab=0x111 status=0 aid=77) [ 667.649596] wlan0: associated [ 670.000224] gobi: int_callback: urb status = -2 [ 672.022072] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 672.022140] ehci_hcd 0000:00:1d.7: PME# enabled [ 739.391804] wlan0: deauthenticating from 00:19:06:20:e1:f0 by local choice (reason=3) [ 739.410619] cfg80211: Calling CRDA to update world regulatory domain [ 739.443256] cfg80211: World regulatory domain updated: [ 739.443265] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 739.443276] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 739.443285] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 739.443294] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 739.443303] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 739.443312] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 742.640197] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0x92204400-0x922047ff] (PCI address [0x92204400-0x922047ff]) [ 742.640234] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 742.640275] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 742.640440] ehci_hcd 0000:00:1d.7: PME# disabled [ 742.640469] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 742.640486] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 749.183184] gobi: int_callback: urb status = -2 [ 751.205156] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 751.205224] ehci_hcd 0000:00:1d.7: PME# enabled [ 751.335143] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0x92204400-0x922047ff] (PCI address [0x92204400-0x922047ff]) [ 751.335180] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 751.335220] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 751.335365] ehci_hcd 0000:00:1d.7: PME# disabled [ 751.335393] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 751.335410] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 752.936869] ADDRCONF(NETDEV_UP): usb0: link is not ready [ 752.941688] ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 758.141189] gobi: int_callback: urb status = -2 [ 761.000210] gobi: int_callback: urb status = -2 [ 763.810072] usb0: no IPv6 routers present [ 765.000201] gobi: int_callback: urb status = -2 [ 767.022154] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 767.022221] ehci_hcd 0000:00:1d.7: PME# enabled [ 792.181500] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 792.181515] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 792.253773] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 792.253793] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 792.285584] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 792.285604] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 792.317602] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 792.317623] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 792.360153] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0x92204400-0x922047ff] (PCI address [0x92204400-0x922047ff]) [ 792.360187] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 792.360228] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 792.360388] ehci_hcd 0000:00:1d.7: PME# disabled [ 792.360417] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 792.360435] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 795.008289] gobi: int_callback: urb status = -2 [ 795.008742] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 795.008945] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 795.009237] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 797.019194] uhci_hcd 0000:00:1d.3: PCI INT D disabled [ 797.031153] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 797.031216] ehci_hcd 0000:00:1d.7: PME# enabled [ 798.714146] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0x92204400-0x922047ff] (PCI address [0x92204400-0x922047ff]) [ 798.714183] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 798.714215] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 798.714328] ehci_hcd 0000:00:1d.7: PME# disabled [ 798.714349] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 798.714362] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 801.008178] gobi: int_callback: urb status = -2 [ 803.030153] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 803.030222] ehci_hcd 0000:00:1d.7: PME# enabled [ 803.723143] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0x92204400-0x922047ff] (PCI address [0x92204400-0x922047ff]) [ 803.723177] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 803.723219] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 803.723384] ehci_hcd 0000:00:1d.7: PME# disabled [ 803.723412] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 803.723429] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 806.008224] gobi: int_callback: urb status = -2 [ 809.008193] gobi: int_callback: urb status = -2 [ 811.030149] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 811.030217] ehci_hcd 0000:00:1d.7: PME# enabled [ 813.014163] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0x92204400-0x922047ff] (PCI address [0x92204400-0x922047ff]) [ 813.014200] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 813.014241] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 813.014408] ehci_hcd 0000:00:1d.7: PME# disabled [ 813.014436] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 813.014453] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 818.000192] gobi: int_callback: urb status = -2 [ 820.022158] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 820.022226] ehci_hcd 0000:00:1d.7: PME# enabled